@article {55,
	title = {Molecular and Morphological Structure of Poultry Manure Derived Organo-Mineral Fertilizers (OMFs).},
	journal = {ACS Sustainable Chemistry \& Engineering},
	volume = {4},
	year = {2016},
	note = {CAPLUS AN 2016:1191726(Journal; Online Computer File)},
	month = {2016},
	pages = {4788 - 4796},
	publisher = {American Chemical Society},
	abstract = {In this work, we detd. the mol. and morphol. structures of complex granulated org. and organo-mineral fertilizers (OGFs and OMFs) obtained from poultry manure and mineral additives, such as diammonium phosphate (DAP) and potassium chloride (KCl).  XRD data indicated complex compns. of the mineral additives DAP and KCl, while OGF and OMF exhibited amorphous backgrounds with small peaks due to the common Earth crust minerals (Si, Mg, Zn, Ca).  Addn. of DAP generated several new chem. compds., while KCl did not react.  Thermogravimetric anal. indirectly showed mineral-mineral interactions at high temps., as can be inferred from their 478 {\textdegree}C peak shift.  Spatially resolved SEM-EDS anal. showed a particularly interesting colocalization of potassium, sulfur, and phosphorus within the OMF, suggesting a reactive salt interaction between DAP and minerals inherently present in OGF.  FTIR anal., on the other hand, did not show significant involvement of org. moieties with the interactions of mineral additives, suggesting org. compds. act mostly as inert support for DAP and KCl.  Collectively, these data suggest a complex nature of the OGF and OMF at the mol. and cryst. levels, which improves our understanding of these complex systems with direct relevance to sustainable nutrient management. [on SciFinder(R)]},
	keywords = {morphol poultry manure organomineral fertilizer},
	isbn = {2168-0485},
	author = {Mazeika, Romas and Dambrauskas, Tadas and Baltakys, Kestutis and Mikolajunas, Marius and Staugaitis, Gediminas and Virzonis, Darius and Baltrusaitis, Jonas.}
}
@article {93,
	title = {Polyamide-thallium selenide composite materials via temperature and pH controlled adsorption-diffusion method.},
	journal = {Applied Surface Science},
	volume = {317},
	year = {2014},
	note = {CAPLUS AN 2014:1526236(Journal; Online Computer File)},
	pages = {818 - 827},
	publisher = {Elsevier B.V.},
	abstract = {Composite materials based on III-VI elements are promising in designing efficient photoelectronic devices, such as thin film org.-inorg. solar cells.  In this work, TlSe composite materials were synthesized on a model polymer polyamide using temp. and pH controlled adsorption-diffusion method via selenization followed by the exposure to the group III metal (Tl) salt soln. and their surface morphol., chem. and cryst. phase information was detd. with particular focus on their corresponding structure-optical property relationship.  XRD anal. yielded a complex cryst. phase distribution which correlated well with the optical and surface morphol. properties measured. pH 11.3 and 80{\textdegree} yielded well defined, low structural disorder composite material surface.  After annealing in N2 at 100{\textdegree}, polycryst. PA-TlxSey composite materials yielded a single TlSe phase due to the enhanced diffusion and reaction of thallium ions into the polymer.  The method described here can be used to synthesize variety of binary III-VI compds. diffused into the polymer at relatively low temps. and low overall cost, thus providing for a flexible synthesis route for novel composite solar energy harvesting materials. [on SciFinder(R)]},
	keywords = {org inorg solar cell polyamide thallium selenide composite, polyamide thallium selenide composite adsorption diffusion synthesis},
	isbn = {0169-4332},
	author = {Ivanauskas, Remigijus and Samardokas, Linas and Mikolajunas, Marius and Virzonis, Darius and Baltrusaitis, Jonas.}
}
@article {166,
	title = {E-beam lithography of computer generated holograms using fully vectorial 3D beam propagation method.},
	journal = {Microelectronic Engineering},
	volume = {87},
	year = {2010},
	note = {CAPLUS AN 2010:985606(Journal)},
	month = {2010///},
	pages = {2332 - 2337},
	publisher = {Elsevier B.V.},
	abstract = {A fully vectorial 3D beam propagation method (BPM) has been applied to obtain a required pattern of computer generated hologram (CGH) with a variable profile of four phase levels.  The computer reconstruction of the CGH image having one and two focal spots was performed by application of the fully vectorial 3D BPM method.  After transferring the CGH by EBL technique an adequate phase profile was obtained.  Inter-level parameter method was developed to obtain the estd. an electron beam dose required for the even topog. patterning.  Using this method, an EBL exposure dose detd. to achieve the required relief amplitude of 1.29 μm was 43 μC/cm2.  The manufd. holograms showed that the overall proposed prodn. process, from the 3D BPM computer simulation to e-beam lithog., can be used to obtain good quality product with reasonable time and computational resources. [on SciFinder(R)]},
	keywords = {electron beam lithog computer generated holograms fully vectorial 3D},
	isbn = {0167-9317},
	author = {Petruskevicius, Raimondas and Baltrusaitis, Jonas and Kezys, Darius and Mikolajunas, Marius and Grigaliunas, Viktoras and Virzonis, Darius.}
}
