@article {87,
	title = {Liquid and Solid Compound Granulated Diurea Sulfate-Based Fertilizers for Sustainable Sulfur Source.},
	journal = {ACS Sustainable Chemistry \& Engineering},
	volume = {2},
	year = {2014},
	note = {CAPLUS AN 2014:1542625(Journal; Online Computer File)},
	pages = {2477 - 2487},
	publisher = {American Chemical Society},
	abstract = {Design and manuf. of high nitrogen content sulfur-contg. fertilizers is of crucial importance in sustainable food and energy crop prodn.  The availability of large elemental sulfur amts. in oil refining and natural gas processing facilities, in combination with decreasing sulfur deposition into soil from natural and anthropogenic sources in a bioavailable sulfate form, calls for innovative engineering solns. that bridge this gap via sustainable sulfur processing.  Diurea sulfate-based liq. and compd. solid granulated fertilizers were synthesized in this work, and their resulting physicochem. properties were detd.  First, phase compositional information on the 2CO(NH2)2{\textperiodcentered}H2SO4-CO(NH2)2-H2O ternary system was measured, and high nitrogen content, \~{}15:1 N:S ratio liq. fertilizer grades, were established.  Next, diurea sulfate granulation expts. using (i) dolomite, (ii) byproduct material after the phosphoric acid extractive prodn., CaSO4{\textperiodcentered}0.5H2O, and (iii) dolomite combined with diammonium phosphate, (NH4)2HPO4, and potassium chloride, KCl, were performed.  Using diurea sulfate, 16-16-16-5.5(S)-0.4(MgO)-0.6(CaO) compd. granulated fertilizers were successfully obtained, and time-resolved changes in their cryst. phase compn. during granule curing were monitored using XRD.  The granule crushing strength measured increased to 3.800 MPa within the 30 day storage thus resulting in high quality fertilizer material. [on SciFinder(R)]},
	keywords = {liq solid granule diurea sulfate fertilizer sulfur},
	isbn = {2168-0485},
	author = {Baltrusaitis, J. and Sviklas, A. M. and Galeckiene, J.}
}
@article {154,
	title = {Layered molybdenum oxide thin films electrodeposited from sodium citrate electrolyte solution.},
	journal = {Journal of Solid State Electrochemistry},
	volume = {15},
	year = {2011},
	note = {CAPLUS AN 2011:429218(Journal; Online Computer File)},
	month = {2011///},
	pages = {711 - 723},
	publisher = {Springer},
	abstract = {Molybdenum oxide thin films were prepd. electrochem. onto the selenium predeposited tin oxide-coated glass substrates using 0.22 M sodium citrate (C6H5Na3O7) soln. (pH 8.3) and sodium molybdate as a precursor.  Cyclic voltammetry was used to det. the deposition potential effects on molybdenum compd. speciation, while quant. thin film compn. was obtained from XPS depth profiles.  Thin molybdenum film growth and compn. was potential dependant.  Predominant molybdenum species was Mo(IV) at all deposition potentials and deposition times.  Optical properties of the molybdenum oxide thin films were detd. using UV-VIS spectroscopy.  The absorption edge varied between 560 and 650 nm, whereas optical band gap values-between 1.79 and 2.19 eV-well within the limits for solar light-induced chem. reactions. [on SciFinder(R)]},
	keywords = {layered molybdenum oxide film electrodeposition sodium citrate electrolyte soln},
	isbn = {1432-8488},
	author = {Sinkeviciute, Dovile and Baltrusaitis, Jonas and Dukstiene, Nijole.}
}
